|
‘04 Maverick “OPC” Oval
Chassis:
All new for 2004, the Maverick “OPC” (One
Piece Chassis) was designed for high banked tracks, were slider style battery
tray/ tray adaptor flex can be a problem.
Made from 3mm
carbon fiber.
This design features 7 battery slots (allowing
it to be used as a 6 cell car as well as a 4 cell car).
Three
wheelbase options for tuning, without too many options.
Short
and long wheelbase holes for mounting the front bumper. There are two sets
of front bumper mounting holes, to allow the bumper to be moved back when
running shorter wheelbase.
Multiple center shock mounting
holes. These allow for the use of longer shocks, longer shock shafts or
longer ball cups.
T-Plate pivot ball adjustment holes.
There are four small holes located around each of the two holes that are
used when bolting the t-plate to the chassis. Slide an .050 wrench through
the holes to adjust and maintain the pivot ball tension.
Front
Bumpers:
Two sets of mounting holes,
for adjusting the bumper to the wheelbase being
run.
Three body mount locations.
Holes for a lexan nose
brace.
And, holes to mount the
transponder on the bumper, either the new personal transponders, or a
traditional transponder. (Front Bumper comes in low cost G-10, or light
weight carbon fiber.)
‘03 Chassis Brace:
Three body
mount locations.
Three side shock mounting locations.
Works with all of the Maverick Oval Chassis and ASC
pod.
‘04 Chassis Brace:
Multiple
side shock mounting locations.
Improved side shock location
lines up with our ‘04 Performance Pod. Works well with all of the Maverick
Oval Chassis and our ‘04 Pod.
‘04 Performance Pod:
Easy
motor access, for motor removal, installation and wiring.
3
separate Wheelbase adjustments can be made, simply by moving the axle
carriers.
Offset or standard mounting positions.
3mm thick Bottom Pod Plate, 2.5mm thick Upper Pod
Plate.
 | 
)
)
){kind=logo}
